Bladework faults
Washing out
Symptom
Blade rising out too early at the finish.
Cause and solution #1
Cause
Not drawing up with the hands at the finish.
Solution
Sit at the finish with the blade square and covered in the water. Feel the position of the hands. Return to this position at the finish of each stroke.
Cause and solution #2
Cause
Leaning away from the rigger at the finish.
Solution
Twist into the rigger at the finish.
Cause and solition #3
Cause
Too much height of the work.
Solution
Check the height of the work and adjust if appropriate.
Cause and solition #4
Cause
Too much pitch.
Solution
Check pitch.